Publicidad
Idiomas disponibles
Idiomas disponibles
Enlaces rápidos
INSTALLATION INSTRUCTIONS FOR PART 99-8251B
Toyota Tacoma 2016-up
KIT FEATURES
• ISO DIN radio provision with pocket
• ISO DDIN radio
• Painted matte black
KIT COMPONENTS
• A) Radio trim panel (with Entune 6.1" display) • B) Radio trim panel (with Entune 7.0" display)
• C) Radio trim panel brackets • D) Pocket • E) (8) #8 x 3/8" Phillips screws
A
B
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: • 70-1761 • TYTO-02 Amplified interface
Antenna Adapter: • 40-LX11
METRA. The World's best kits.
99-8251B
C
D
metraonline.com
™
Table of Contents
Dash Disassembly ................................................. 2
Kit Assembly
– ISO DIN radio provision with pocket ...................... 3
– ISO DDIN radio provision ...................................... 3
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
• 10 mm socket wrench
E
CAUTION!
All accessories, switches, climate controls panels,
and especially air bag indicator lights must be connected before
cycling the ignition. Also, do not remove the factory radio with
the key in the on position, or while the vehicle is running.
© COPYRIGHT 2016 METRA ELECTRONICS CORPORATION
Publicidad
Manuales relacionados para Metra 99-8251B
Resumen de contenidos para Metra 99-8251B
- Página 1 INSTALLATION INSTRUCTIONS FOR PART 99-8251B Table of Contents Toyota Tacoma 2016-up 99-8251B Dash Disassembly ..........2 Kit Assembly – ISO DIN radio provision with pocket ...... 3 – ISO DDIN radio provision ........3 KIT FEATURES • ISO DIN radio provision with pocket •...
-
Página 2: Dash Disassembly
99-8251B Dash Disassembly 1. Unclip and remove the panel surrounding the radio including the a/c vents. (Figure A) 2. Remove (4) 10 mm bolts securing the factory radio. (Figure B) Continue to kit assembly (Figure A) (Figure B) -
Página 3: Kit Assembly
AXXESS. Test the radio for antenna connector in the dash, and proper operation. complete all necessary connections to the radio. Metra recommends using 4. Reassemble the dash in reverse the proper mating adapter from Metra order of disassembly. and/or AXXESS. Test the radio for proper operation. -
Página 4: Important
INSTALLATION INSTRUCTIONS FOR PART 99-8251B IMPORTANT If you are having difficulties with the installation of this product, please call our Tech Support line at 1-800-253-TECH. Before doing so, look over the instructions a second time, and make sure the installation was performed exactly as the instructions are stated. -
Página 5: Toyota Tacoma 2016 Y Mas
INSTRUCCIONES DE INSTALACIÓN PARA LA PIEZA 99-8251B Indice Toyota Tacoma 2016 y mas 99-8251B Desmontaje del tablero ..........2 Ensamble del kit – Provisión de radio ISO DIN con cavidad ....3 – Provisión de radio ISO DDIN ........3 CARACTERÍSTICAS DEL KIT •... -
Página 6: Desmontaje Del Tablero
99-8251B Desmontaje del tablero 1. Desenganche y quite el panel que rodea el radio incluyendo las rejillas del aire acondicionado. (Figura A) 2. Quite los (4) pernos de 10 mm que sujetan el radio de fábrica. (Figura B) Continúe kit de montaje... -
Página 7: Ensamble Del Kit
Metra recomienda el uso de y luego sujételo al ensamble con los adaptadores adecuados de acoplamiento tornillos suministrados con el radio. de Metra y/o de AXXESS. Pruebe el radio (Figura B) para verificar que funcione correctamente. 5. Localice el arnés de cableado de fábrica 4. -
Página 8: Importante
INSTRUCCIONES DE INSTALACIÓN PARA LA PIEZA 99-8251B IMPORTANTE Si tiene dificultades con la instalación de este producto, llame a nuestra línea de soporte técnico al 1-800-253-TECH. Antes de hacerlo, revise las instrucciones por segunda vez y asegúrese de que la instalación se haya realizado exactamente como se indica en las instrucciones.