Kit Assembly - Metra 99-8251B Instrucciones De Instalación

ISO DIN radio provision with pocket
1. Attach the radio trim panel brackets to
the radio trim panel using (4) #8 x 3/8"
Phillips screws supplied. (Figure A)
2. Attach the pocket to the bracket
assembly using the (4) supplied
#8 x 3/8" Phillips screws. (Figure B)
3. Remove the metal "DIN" sleeve and
trim ring from the aftermarket radio.
4. Slide the radio into the completed
assembly, and then secure it to the
assembly using the screws supplied
with the radio. (Figure B)
5. Locate the factory wiring harness and
antenna connector in the dash, and
complete all necessary connections
to the radio. Metra recommends using
the proper mating adapter from Metra
and/or AXXESS. Test the radio for
proper operation.
6. Reassemble the dash in reverse order
of disassembly.

Kit Assembly

(Figure A)
(Figure B)
99-8251B
ISO DDIN radio provision
1. Attach the radio trim panel
brackets to the radio trim panel
using (4) #8 x 3/8" Phillips screws
supplied. (Figure A)
2. Slide the radio into the completed
assembly, and then secure it to the
assembly using screws supplied
with the radio. (Figure B)
3. Locate the factory wiring harness
and antenna connector in the
dash, and complete all necessary
connections to the radio. Metra
recommends using the proper
mating adapter from Metra and/or
AXXESS. Test the radio for
proper operation.
4. Reassemble the dash in reverse
order of disassembly.
3
(Figure A)
(Figure B)