Safety Instructions; General Safety Instructions; Specific Safety Instructions - Virax Viper I10 Manual De Utilización

Safety instructions

Read and retain these instructions for use.

General safety instructions

Choice of tool

Use the appropriate tool.

Do not use tools for other purposes than the work for which they have been designed.
Maintenance and storage

Store your tools in a safe place. Unused tools must be stored in a dry, locked place, out of reach of children.

Maintain your tools carefully. Keep your tools clean to work better and more safely.

Follow indications relative to maintenance and indications concerning changing accessories. Keep handles dry and free of
oil and lubricants.

Check whether the tool is damaged. Before using the tool, always carefully check that parts are functioning perfectly.

Check whether moving parts are functioning correctly, whether they do not become stuck or if other parts are damaged.
All the components must be assembled correctly and satisfy conditions to guarantee the tool's perfect operation. Every
safety device, every switch and every other damaged or defective part must be repaired or replaced appropriately by a
qualified technician.

Caution! Ensure that you use the tool and its accessories in accordance with the safety instructions. Also take account of
the tool's possibilities by paying attention to the working conditions and the task to be undertaken. Using the tool for tasks
other than those intended may be dangerous.

This tool satisfies safety rules in force. All repairs must be undertaken by qualified professionals with original spare parts; if
not, the tool may pose a danger for the user and invalidate the guarantee.
Safety instructions for the user:

Keep children away. Do not allow other people to touch the tool; keep them away from your working area.

Wear appropriate working clothes. Do not wear loose clothing or jewels; they could be caught by moving parts. When
working in the open air, it is recommended that rubber gloves and anti-skid heeled shoes are worn. Wear a hair net if you
have long hair.

Do not make the radius of your action too wide. Avoid adopting a position which is tiring for the body; ensure that your
support on the ground is firm, and keep in balance at all times.

Always be attentive. Look at your work, act in a sensible way and do not use the tool when you are tired.
Safety instructions relative to the working area

Keep order in your working area. Disorder in the working area increases the risk of an accident.

Take account of the working area environment.

Ensure that the working area is well-lit.

Specific safety instructions:

Set of inserts

Do not slide your fingers in the inserts profile.

Keep your fingers safe when opening the head.

Never install inserts of different diameters on the same machine.
10