TROUBLESHOOTING
Symptom
My machine is not operating
but the Power indicator light
is on.
I have inserted 8 sheets
into the Manual Feed Entry
and it is jamming.
SPECIFICATIONS
Power Supply
Power Consumption
Entry width
Auto Stack Feed Capacity
Manual Feed Paper Capacity
Maximum Cutting CD/DVD/Credit Card Capacity
Speed
Basket Volume
Shredder Size
Unit Dimensions
Unit Weight
1. Turn the power switch off and back on.
2. Check to see if the Motor Overheat Indicator is on. If so, you will have to wait till the shredder cools
down and the indicator shuts off.
3. Press the RESET/STOP button.
4. Check Auto Stack Feed Entry, Manual Feed Entry, and CD entry for jammed materials or foreign
objects. If there are jammed materials, pull out and Press the RESET/STOP button.
5. Check the control panel indicator lights. If Check Door/Safety Cover Indicator is on, close the door
and the safety cover. If Basket Full Indicator is on, empty the basket. If Check Basket Indicator is on,
check to make sure the basket is properly placed inside the shredder.
Basket Full
Check Basket
Check Door /
Safety Cover
1. Check Specifications to make sure the correct paper is being used.
2. Shredded pieces may be on the cutter. If the Power Indicator is blinking press the RESET/STOP
button. Then hold down the FWD button until all of the shredded pieces fall into the basket. You can
then re-insert the papers to be shredded.
7
Solutions
Motor
Power
AC 120V / 60Hz
260 W
9in / 230mm
100 sheets (Letter, A4 size / 80 g/m² paper)
8 sheets (Letter, A4 size / 80 g/m² paper)
1 Piece
10.5 feet/min / 3.2 m/min
10.6 gal / 40 L
1/8" x 1" / 3mm x 25mm
15.8" x 15.5" x 32.28" / 400mmx394mmx759mm
44 lbs / 20.6 kg