Troubleshooting - Steren RAD-500 Manual De Instrucciones

TROUBLESHOOTING

Trouble Solution
Cannot power on the device - Check the battery. Make sure that the battery
is properly installed.
- Recharge the battery.
Reception is weak - To increase the volume level.
- The signal can be out of range/ the equipment
is too far from signal.
- Check the antenna position.
- Change your position. If you are inside
Range is limited
of a steel/ concrete building, go to a place
with less obstacles.
- Check the antenna position. Battery energy
is weak.
- If you are transmitting, place the device
Noise and distorsion
around 2.5 cm from your mouth.
- If you are receiving, decrease the volume
level.
14