Setting The Temperature - Philips Provapor GC6026 Manual Del Usuario

ENGLISH
8
Fast refill
C
1 First set the on/off switch (D) to 'off'.
2 Press the steam activator button until you no longer hear any
steam escaping from the appliance.
3 Keep the steam activator button pressed in and slowly unscrew
the cap of the steam tank by turning it anti-clockwise.This will
depressurise the steam tank.
4 Remove the mains plug from the wall socket.
5 Fill the steam tank as described in section 'Filling the steam
tank' and let the appliance heat up again.
Label with
ironing
instructions
B
C
D
Z

Setting the temperature

Always place the steam tank on a stable, level and horizontal surface
Do not put the steam tank on the soft part of he ironing board.
Always place the iron on the iron stand or on its heel. Do not put the
hot iron on the supply hose or the mains cord. Make sure the cord
does not come into contact with the hot soleplate.
C
1 Set the temperature dial to the required ironing temperature
by turning it to the appropriate temperature indication.
- Check the garment label for the required ironing temperature:
- 1
Synthetic fabrics (e.g. acrylic, viscose, polyamide, polyester)
- 1
Silk
- 2 Wool
- 3 Cotton, linen
- When you do not know what kind of fabric the article is made of,
try to iron a spot which will be invisible when you wear it.
Type of fabric
Synthetic fabrics, e.g. acetate,
acrylic, viscose, polyamide,
polyester, and silk
Wool
Cotton, linen
Please note: Z in the table
means that the article cannot
be ironed.
Temperature Steam control
dial
-
1
q
2 R
3