Brandson Equipment 304258 Manual Del Usuario página 13

Delay function
You can delay the cycle start time using the delay function. To do this, press the
centre button for about 3 seconds until all the LEDs glow continuously.
By pressing the middle button again, the start time can be delayed by 1 hr each
time the button is pressed.
The start time can be delayed by a maximum of 23 hours.
Example 3:
The current time is 8:00 a.m, your setting is Frequency = 24 and Duration = 15.
This means that watering is activated every 24 hours for 15 minutes. The watering
is activated every day at 8:00 a.m in the morning. However, if you want to activate
the timer at 10:00 a.m every day, then the start time has to be delayed by 2
hours.
Now press the delay button for about 3 seconds till the LED glows continuously.
Then press the button again 2 times to delay the timer by 2 hours. The device
then starts the watering cycle with a delay of 2 hours at 10:00 a.m every 24 hours.
13
English