Storage And Disposal - nVent Hoffman EL1200DS Manual Del Usuario

Storage
• The product must be stored in a dry and clean environment. Do not strain the product mechanically during storage.
After a damp or soiling storage the product may only be installed after checking its condition by an approved
electrician.
Disposal (European Union)
• Do not dispose the product with the regular household waste! Products marked with this sign must be disposed
according EU-directive 2012/19/EU devices at local collection points for such devices!
Installation instructions (read completely before installation)
Switch off the mains or respectively the connection lead before doing any works!
Only use parts, which are supplied with the product or are described as accessories!
Inspect the product for loose parts inside the housing.
When there are loose parts inside the housing and these are not explicitly described, the product may not be
installed or operated.
Only use fastening material suiting the installation background.
Unpacking
• Check the delivery for completeness.
• Carefully take the product out of the packaging removing any transport safeguards.
• Before disposal of the packaging material make sure that all components of the product are removed.
• Dispose of the packing material professionally.
• Keep the packing material away from children.
Installation steps
• Install the LED-luminaire as shown in the figures 1 - 3 ; 5 .
• Remove the LED-luminaire as showen in figure 4 .
Electrical Connection
• Connect the power supply to the luminaire as shown in figure 6 - 7 .
• Install a door-operated switch as showen in the figure 8 . Each door-operated switch only affects the light it is
connected to.
• When connecting several luminaires in lead-through wiring, connect them as shown in figure 9 .
Max. number of lamps in lead-through wiring: 4
• If several lights are linked, the total current including the devices connected to the sockets must not exceed 16A.
For devices with US socket, the limit is 10A.
• Unlock the power supply as shown in figure 10 if needed.
• When inserting and removing a plug, hold the light with one hand!
Check if the product functions properly and is securely fixed!

Storage and Disposal

Installation
EN
www.nvent.com | 5