Honda Power Products WB20XT Manual De Explicaciones página 17

5. Check the air cleaner element.
Remove the wing nut, washer and air cleaner cover.
Check the element for dirt or obstruction. Clean the element if
necessary (see page 23).
AIR CLEANER COVER
AIR CLEANER ELEMENT
CAUTION:
Never run the engine without the air cleaner. Rapid engine wear will
result from contaminants such as dust and dirt being drawn through
the carburetor into the engine.
6. Check the priming water.
The pump chamber should be primed with full of water before
operating.
CAUTION:
Never attempt to operate the pump without priming water, or the
pump will overheat. Extended dry operation will destroy the pump
seal. If the unit has been operated dry, stop the engine immediately
and allow the pump to cool before adding priming water.
PRIMING WATER FILLER CAP
14