Program Schedule Set Up - Dimplex CX-MPC Manual Del Propietário

Program Schedule Set up

Program Set up "Quick Set"
The program function guides the
user through the set up for each
of the time settings (Wake, away,
Home and sleep) based on the
selected zones to set the desired
temperatures.
! NOTE: It is recommended that
the main overall general program-
ming be done first - i.e. Bedrooms
during the work week and pro-
gram the entire day, then perform
another set up for another zone to
speed up the programming. after
the main programming is com-
plete, fine tuning can be done on
a single day, zone or event basis.
! NOTE: There is a blank setting
table at the back of this manual to
assist with ensuring that all of the
required events and zones have
been set up to the desired times
and temperatures.
CAUTION: Always press the
icons with a blunt object. Sharp
objects like pen and pencil points
may damage the touch screen.
1. Press the
the set up. The first setting
will be for the Wake Event
. The zone icons will
begin to flash.
10
icon to start
! NOTE: at any time pressing
the icon will return to the previ-
ous step. If the
3 seconds it will return to the main
operating screen.
2. select the zone(s) that the
settings are going to be ap-
plied.
! NOTE: as each zone is se-
lected it will become solid and the
remaining zones will continue to
flash.
3. Press the
4. The day icons will begin to
flash.
5. select the days that the set-
tings are going to be applied.
! NOTE: as each day is se-
lected it will become solid and the
remaining days will continue to
flash.
6. Press the
7. using the
either side of the time set-
ting, set the time for the Wake
event to occur.
8. Press the
9. using the
icon is held for
icon.
icon.
and icons on
icon.
and icons on
www.dimplex.com