Airwell UM WATTS 01-N-1ALL Manual Del Usuario página 5

MODE DESCRIPTIONS
use the and keys to change the operating mode.
SETTINg THE TIMER
use this menu to set the times:
1. With and
2. Press oK.
3. Then with
4. Press .
5. finally, with
6. Press on
COMFORT MODE
by pressing and the comfort mode temperature flashes and can then be set. confirm the setting by
pressing .
The ambient temperature
Your ambience Terminal will now maintain the comfort temperature until any further user changes.
AUTOMATIC MODE
The ambience Terminal follows the chosen programme in accordance with the present time.
if required, a temporary temperature manual override can be entered that will remain effective until the next
programme change.
With and you can set the temporary temperature required and confirm it by pressing
override logo lights up
at the next change in the programme, the logo
operation.
NIgHT RUNNINg MODE
by pressing and the night running mode temperature flashes and can then be set. confirm the setting
by pressing .
The ambient temperature
Your ambience Terminal will now maintain the night running temperature until any further user changes.
ANTI-FREEZINg PROTECTION
use this mode to protect the premises from the effects of freezing.
by pressing and the anti-freeze protection mode flashes and can then be set. confirm the setting by
pressing .
The ambient temperature
Your ambience Terminal will now maintain the anti-freeze protection temperature until any further user changes.
STANDbY MODE
use this mode if you have to switch your heating off (solely to stop the heat pump heating mode).
Press , to display off then confirm the setting by pressing
reactivate the ambience Terminal (restart the heating) by pressing the
THIS MODE DOES NOT MAINTAIN AN AbOVE FREEZINg TEMPERATURE.
, set the hours.
and , set the minutes.
and , set the day.
reappears after a few seconds.
.
will switch off and the programme will revert to its normal
reappears after a few seconds.
reappears after a few seconds.
.
or keys.
3
. The manual