Before First Use - Hamilton Beach 40715 Manual De Instrucciones

Before First Use

Wash all removable parts in warm,
soapy water. No parts may be washed
in a dishwasher.
The water pump must be "primed"
before first use to work properly.
Operating without water in the Water
Reservoir can permanently damage the
appliance.
4. When unit is ready, the light next to
the Temperature Selection button will
come on. Place an empty container
under Frothing Nozzle so that nozzle is
completely inside container.
(Priming the Pump)
1. Make sure all three buttons are in the
OFF position (not pushed in) and that
the Steam Control Dial is turned fully
clockwise to NO STEAM ( ).
5. Turn the Steam Control Dial
counterclockwise to STEAM ( ).
Press Pump Button to pump hot water
out of Frothing Nozzle for cleaning
purposes.
w WARNING
immerse machine, cord, or plug in water or any other liquid.
2. Fill the Removable Water Reservoir to
the MAX fill line with cold water and
replace securely on the back of unit.
6. Fill the container about halfway
full. NOTE: The green light next to
Temperature Selection button will go
off once Pump Button is pushed.
Electrical Shock Hazard. Do not
3. Plug into outlet. Press ON/OFF button
to turn unit on.
7. Press Pump Button again to turn
Frothing Nozzle off; then turn Steam
Control Dial clockwise to NO STEAM
( ).
5