How to Use
7. Place one or two cups under Brew
Head spouts. If using one cup, use
one wide enough to catch espresso
from both spouts.
8
(cont.)
8. Press Pump Button to begin flow of
espresso; press Pump Button again
to stop flow. As espresso dispenses,
it will gradually look lighter in color.
Allow espresso to drip from Filter
Holder for 15-20 seconds before
removing cup(s).
9. Wait about 1 minute before removing
Filter Holder from machine to allow
espresso grounds and excess water
still flowing through the pump to
finish. NOTE: Some water may
continue to drip intermittently from
Brew Head. This is normal and a
result of product operation.
10. To empty espresso grounds and/
or an espresso pod from the Filter
Holder, flip the plastic lever located
on the handle of the Filter Holder
and hold the lever open.