Switch On; Switch Off; Pairing - Beats COW81000012 Guia Del Usuario

English

Switch On

To switch on, press and hold the multifunction key
about two seconds.
The headset beeps ascending tones, and the blue
indicator light is briefly displayed. When the headset
tries to connect to the last used phone or music player,
the red indicator light flashes slowly. When the headset
is connected to a device and is ready for use, the blue
indicator light flashes slowly. If the headset has not
been paired with a device, it automatically enters the
pairing mode.
8
WirelessUG_FINAL.indd 8-9
English

Switch Off

To switch off, press and hold the multifunction key for about three seconds.
The headset beeps descending tones, and the red indicator light is briefly
displayed. If the headset is not connected to a device within 10 minutes, it
switches off automatically.

Pairing

1. Ensure that your phone or music player is switched on.
2. To pair the headset if it has not been previously paired with a device, switch
on the headset. The headset enters the pairing mode, and the blue and
red indicator light starts to flash quickly. To pair the headset if it has been
previously paired with another device, ensure that the headset is switched
off, and press and hold the multifunction key (for about five seconds) until
the blue and red indicator light starts to flash quickly.
3. Activate the Bluetooth® feature on your phone or music player, and set it to
search for Bluetooth devices.
4. Select "Beats Wireless" from the list of found devices on your phone or music
player.
5. If necessary, enter passcode 0000 to pair and connect the headset to your
device.
9
5/25/12 2:22 PM