Proper Use; Selecting Temperature - Bosch+Sohn bosotherm 1300 Instrucciones Para El Uso

being operated.
• Do not pull, twist or make any sharp kinks in the cables.
• Do not stick pins or pointed objects into this heating pad.
• Children should be supervised to ensure that they do not use the heating pad as a toy.
• This heating pad must be checked frequently for signs of wear or damage. If such signs are
present, or if the cables are damaged, or if this heating pad has been used incorrectly, it must be
taken to either the manufacturer or the dealer before further use.
• Repairs may only be carried out by specially trained personnel or at an authorised repair workshop,
as special tools are required. Incorrect repairs may cause considerable danger to the user.
• Should you still have questions on using our appliances, please contact our customer service.

2. Proper Use

This heating pad is designed for warming the human body. It allows you to apply tar geted warmth.
Heat promotes the circulation and relaxes the muscles. This heating pad is not intended for use in
hospitals or for commercial applications. In particular, it may not be used on infants, small children,
persons insensitive to heat, helpless persons or animals.
Our heating pads made of breathable microfleece are very adaptable and agreeable to the skin.
They can also be used without their fabric cover. The detachable switch allows the pad to be cleaned
in the washing machine (see cleaning instructions).
To avoid soiling or damaging the heating pad, we recommend using a fabric cover, particularly
when applying essential oils and ointments.
When used for the first time, the heating pad may start to smell of plastic but this will soon go
away.
3. Operation
3.1 Safety
This heating pad has a SAFETY SYSTEM. This electronic sensor technology prevents the entire
surface of the heating pad from overheating by automatically switching off in the event of a fault.
If the safety system switches off the heating pad automatically as a result of a fault, the indicator
lamp is no longer illuminated even when the heating pad is switched on. Please note that, after a
fault has occurred, the heating pad can no longer be used for safety reasons and must be sent to
the service address indicated.

3.2 Selecting temperature

The fastest way to heat up the heating pad is to first set the switch to the highest setting. A lower
setting can be selected later if required.
After switching on the heating pad, the setting starts flashing briefly, while the heating pad conducts
a self-test. Then the setting remains illuminated continuously.
We recommend the lowest temperature setting for extended use of the heating pad.
3.3 Temperature settings
Setting: 0 Off
3.4 Automatic switch-off function
These heating pads have an automatic switchoff function which stops the heat supply
approx. 90 minutes after switching on the pad. The illuminated function display then
starts to flash. To operate the heating pad again, you must first set the switch to zero.
After about 5 seconds, it can be switched on again.
If the heating pad is no longer used after the timed switch-off, it should be switched
off (setting "0") or else unplugged from the mains.
1 Minimum heat
2 Medium heat
3 Maximum heat
8
90
min
STOP