Proper Usage - Chauvet SCORPION GBC EU Manual Del Usuario

Proper Usage

Interlock Key
Page 12 of 68
This fixture is for overhead mounting only. For safety purposes, CHAUVET®
recommends mounting your lighting effect fixtures on steady, elevated platforms or
sturdy overhead supports using suitable hanging clamps. In all cases, you must use
safety cables. You can obtain appropriate mounting hardware from your lighting vendor.
International laser safety regulations require that laser fixtures must be operated in the
fashion illustrated below, with a minimum of 3 meters of vertical separation between the
floor and the lowest laser light vertically. Additionally, 3 meters of horizontal separation
is required between laser light and audience or other public spaces.
CAUTION: USE OF CONTROLS, ADJUSTMENTS, OR PERFORMANCE OF
PROCEDURES OTHER THAN WHAT IS SPECIFIED HEREIN MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE
This product has an interlock key to prevent the laser from operating unless the key is
inserted and turned to the ON position.
Always turn the interlock key to the OFF position and remove it when leaving this
product unattended to prevent accidents or injuries to third parties.
Scorpion™ GBC EU/RBM EU/RGY EU/BLU EU User Manual (Rev. 5 ML)