I
Install batteries when the Meter is
new if needed. Replace batteries
when the Meter displays the
battery symbol
4
Install Batteries
.
1. Press firmly on "open" arrow
and slide forward in the direc-
tion of the arrow. The lid
releases.
2. Place new batteries into the bat-
tery compartment with the "+"
side up. Slide lid back into place,
lining up with open slots, and
close firmly. Test results stored in
the memory are not erased
when batteries are changed, but
time must be reset.
NOTE: Two 3 volt (CR2032) lithium batteries
are furnished with the Meter.
WARNING: Keep batteries
away from children. Lithium
batteries are poisonous.
If swallowed, immediately
contact your physician or
poison control center.
Discard batteries according
to your local environmental
regulations.
Glucometer Elite
®
XL