Safco 5260 Instrucciones De Montaje

Sort and count your parts!
PARTS LIST
LETTER
DESCRIPTION
CODE
A
Post
B
Shelf Beam (Front & Back)
C
Shelf Tie Beam (Sides)
D
Support Beam (Center)
Particleboard Shelves
E
(Packaged separately)
Shelf Beams
Long Flanges to
and Tie Beams
form sides
Rivets
1
Position two A Posts side-by-side with the long
flanges forming the sides. Insert the rivets on four of
the B Shelf Beams to the slots on these two posts.
Attach the ends at the same level on each post.
Connect the rivets of eight C Shelf Tie Beams to
both post sides at the same level as the shelf beams,
keeping the long flanges toward the outside.
A
3
With the assistance of a helper, set the unit upright.
Attach the D Center Support Beams to the rivets on
the inside and
center of the
front and back
(long) shelf
beams. Double-
check that all
of the shelf
supports are
level and secure.
5260-37: 1 of 2; 04/00
Archival Shelving
ASSEMBLY INSTRUCTIONS
QTY. PART NO.
4 5260-04
8 5260-01
8 5260-02
4 5260-03
4 5261-01
ASSEMBLED UNIT
Support
Beam
B
C
All rivets must
connect to the
interior walls
of the posts.
Safco Products Company, New Hope, MN 55428
For questions or concerns, please call
Safco Consumer Hot Line: 1-800-664-0042
available Monday-Friday 8:00 AM to 4:30 PM (Central Time)
(English-speaking operators)
B
A
C
Place unit on a level surface. This unit should be securely anchored to a wall or floor with
suitable fasteners, which are not included. Do not use this product for anything other than
the manufacturers intended purpose. Do not stand on any part of the unit, or use it as a
ladder. Do not overload. Distribute weight evenly on each level. Keep heavier loads near
the bottom. Use care when working with metal parts.
2
Assemble the two remaining posts to the four
remaining long shelf beams (referring to step 1). Turn
the post and beam assembly over so the short sides
of the post flanges form the front of the unit. Attach
this assembly to the short shelf tie beams. Attach
each shelf tie beam at the same level as the other
beams on each post.
4
Place one E Particleboard Shelf (packaged sepa-
rately) on each of the four shelf sections.
D
MODEL 5260
NUMBER
E
PACKAGED
SEPARATELY
D
E