Safco 5205 Instrucciones De Montaje

IMPORTANT
PARTS LIST
LETTER
DESCRIPTION
CODE
A
File Frame
B
Hanger Slide
C
Bottom Shelf
D
18" Posts w/Caps
E
Half-Sleeves
F
Swivel Casters
G
Swivel/Locking Casters
ASSEMBLED UNIT
Model 5205
1
Determine the desired position
of the bottom shelf (only); on
each post, place two E Half-
Sleeves around the post at the
correct position, with the
LARGE ends of the sleeves
toward the BOTTOM of the
post and the ridges inside
the sleeves fitting into the
grooves in the post. Press
the two halves until they
snap together.
NOTE: set-up bottom shelf at
the lowest position possible
for maximum storage area and
to allow hanging file mobility.
5205-37: 1 of 2; 01/99
All manuals and user guides at all-guides.com
Mobile File Cart
READ and FOLLOW these instructions carefully!
CHECK ALL PACKAGING - there may be parts in it!
SORT and COUNT your parts - compare with the list below. If you find problems,
refer to the Product Warranty Registration form included with this product.
QTY. PART NO.
1 5205-11
1 5205-12
1 5205-02
4 5205-03
16 5280-05
2 5205-25
2 5205-24
E
RIDGE
SMALL
GROOVE
LARGE
END
Safco Products Company, New Hope, MN 55428
B
A
C
2
Position the C Bottom Shelf on end, and from the
BOTTOM side of the shelf (the bottom side is
recessed), slide the TOP end of a D Post through
END
a corner hole until the half-sleeves are seated in the
corner hole. Repeat with remaining posts.
CONNECTED
HALF-SLEEVES
MODEL
5205
NUMBER
D
F
G
POST