Step 15 Temperature Controls; Step 16 Purging The Water System - Monogram ZWE23ESNSS Instrucciones De Instalación

STEP 14 AUTOMATIC ICEMAKER
• Make sure the icemaker is turned to the ON position
ONLY AFTER the water line is connected and
the water is turned on.
• Newly installed refrigerators may need up to 24
hours to cool and for ice production to begin.
WARNING
Avoid contact with the moving parts
of the ejector mechanism, or with the heating element
(located on the bottom of the ice maker) that releases
the cubes. Do not place fingers or hands on the
automatic ice making mechanism while the refrigerator
is plugged in.
AVERTISSEMENT
Évitez le contact avec les
pièces mobiles du mécanisme d'éjection et l'élément
qui libère les cubes. Ne placez ni les doigts ni les
mains sur le mécanisme de production de glace
automatique lorsque le réfrigérateur est branché.
ADVERTENCIA
Evite el contacto con las partes
en movimiento del mecanismo expulsor o con el
elemento de calefacción (ubicado en la parte inferior
de la máquina de hielos) que expulsa los cubos. No
coloque los dedos ni las manos en el mecanismo de la
máquina de hielos automática mientras el refrigerador
esté enchufado.
Normal Use
• Normal ice production =
100 - 130 cubes in 24 hours.
To fill bucket to maximum
capacity after installation, dispense
3–4 cubes at 12 hours and 18 hours.
Allow 2–3 days for the bucket to
completely fill with ice.
It is normal for ice to appear discolored initially or after
water filter replacement. After starting the icemaker, or
replacing the water filter, Throw away the first bin of ice
to allow the water line to clear.
The freezer ice maker is available as a kit for
some models.
18
Installation Instructions
Ice
maker
Feeler Arm
2–3 days
STEP 15 TEMPERATURE
CONTROLS
• The temperature controls are preset at 37°F (2.77°C)
for the refrigerator and 0°F (-17.77°C) for the freezer.
• Allow 24 hours to stabilize before making adjustments.
STEP 16 PURGING THE WATER
SYSTEM
Once the unit is on, press the dispenser button/
paddle and dispense water for at least 5 minutes
to remove air from the water line, and flush the
filter. The first few batches of ice should also be
discarded. For Non Dispense models, throw away
the first bin of ice production.
31-1000602 Rev. 0