Kohler K-77780 Guia De Instalacion página 8

Flexible
Hose
Level
Switch Wire
5. Prepare the Tank
CAUTION: Risk of product damage. Confirm the wires and water supply hose will not interfere with the
vitreous shell as it is lowered into place. The vitreous shell may cause damage to the wires or hose.
NOTE: It may be necessary to disconnect the water supply hose and tape it to the floor with the wires to
keep it clear of the vitreous while it is lowered into place.
Place the pump wiring harness, level switch wire, refill tube, electrical plug, and wand wiring
harness on the floor at the location of the rear access opening and tape them on the centerline so
they will not interfere with the vitreous shell.
Clip the spray shield into place over the fill valve.
1288209-2-A
Tape
Pump Wiring
Harness
Refill Tube
Electrical Plug
Wand Wiring
Harness
Spray Shield
8 Kohler Co.