Watchguard Firebox T70 Guia De Inicio Rapido página 32

Firebox
將 重設為預設設定
Firebox
若您需要，可以將 還原為出廠預設值。例如，如果您不知道系統管理員帳戶密碼，或是想以
Firebox
新設定重新開始，您可以重設 。請確定您在重設
以供日後還原之用。
Firebox Firebox T70
如需有關如何重設 的資訊，請參閱
www.watchguard.com/help/documentation/hardware.asp
62
Firebox Firebox
之前已備份您的 設定，
硬體手冊 ，網址是：
Notices:
All WatchGuard products are designed and tested to meet strict safety requirements. These requirements
include product safety approvals and other global compliance standards. Please read the following
instructions carefully before operating the product, and refer to them as needed to ensure the continued
safe operation of your product. Additional information can be found in the Hardware Guide located on the
WatchGuard website: http://www.watchguard.com/help/documentation/hardware.asp
Product Safety Certification
The WatchGuard product is safety certified under the following standards:
• CAN/CSA C 22.2 No. 60950-1-07+A1:2011+A2:2014
• UL 60950-1:2007 R10.14
• IEC 60950-1:2005 (Second Edition) + Am 1:2009 + Am 2:2013
• N 60950-1:2006 + A11:2009 + A1:2010 + A12:2011 + A2:2013
Safety Warning
• Do not place objects on the power cord.
• Do not obstruct the ventilation openings. These openings prevent overheating of the machine.
• Never push objects of any kind into slots or openings on this equipment. Making a contact with a
voltage point or shorting out a part may result in fire or electrical shock.
• When removing or installing an appliance, follow the general installation safety instructions.
• You must disconnect the AC power cord from the Firebox before you remove the cover of the Firebox for
any reason.
• There is risk of explosion if the battery is replaced by an incorrect type. Dispose of used batteries
according to the manufacturer's instructions.
• Connect the PoE interfaces only to PoE networks, without routing to the outside plant.
• The unit is for desktop use only.
Disclaimer
WatchGuard shall not be held liable if the end user alters, modifies, or repairs any WatchGuard
hardware appliance.
63