Extra Functions - Steren BAF-1250 Manual De Instrucciones

INSTRUCTIONS
Before connecting the speaker, make sure the system is off and the controls on the minimum level.
On the contrary the system could be damaged.
1.- Plug the polarized cable to electric power and to the speaker.
2.- Plug the Microphone on the "MIC" input with a 6.3mm or Canon connector.
3.- Plug an auxiliary system (CD, MP3, DVD, ipod, etc.) on "LINE IN" input.
To avoid damages in the BAF-1250 and to obtain a good sound quality you should adjust the volume of your
amplified audio source (ipod, MP3, etc.) between 50% to 70% level.
4.- Turn on the systems. A green LED light up on the speaker to indicate it is on.
5.- Set the volume on the middle level on the MIC and LINE IN input.
6.- Increase little by little the master volume (place on the right side of LINE OUT* connector).
7.- Set TREBLE and BASS controls to equalize the sound.
8.- A red LED light up when the system detects overload power. You must decrease the volume.

EXTRA FUNCTIONS

6.3mm and cannon connectors marked as LINE OUT can support an amplifier or even another a
speaker box amplified.
At the bottom of the speaker there is a hole to place a stand.
6