Extra Functions - Steren BAF-1550 Manual De Instrucciones

16. AC power: Use it to connect the AC power cord.
17. On / Off power switch: Press to power on / off the speaker box.
18. Overload indicator.
19. Power indicator.
INSTRUCTIONS
Make all initial connections with the power switches OFF on all equipments. Make sure volume level are all the
way down, you can adjust it later.
1. Connect the power cable to the electric outlet and connect the other end of the power cable to the speaker.
2. Connect a microphone to the input jack labeled MIC IN through the 6.3 mm plug or cannon plug.
3. Use the RCA line in input jacks in order to connect a CD, MP3, DVD, or other type of audio device.
4. Power all the devices on. A green LED indicator light will illuminate indicating that the speaker is powered on.
To avoid damages in the BAF-1550 and to obtain a good sound quality you should adjust the volume of your
amplified audio source (ipod, MP3, etc.) between 50% to 70% level.
5. Adjust the volume levels of the connected devices (CD, MP3, etc.) as well as the line in level on the speaker.
Also adjust the bass and treble levels in order to equalize the sound.
6. The red LED indicator light will illuminate if an overcharge is detected. This occurs in order to protect your
speaker. The volume levels should be reduced in order to prevent serious damage to the speaker.

EXTRA FUNCTIONS

6.3mm and cannon connectors marked as LINE OUT can support an amplifier or even another a speaker box
amplified.
At the bottom of the speaker there is a hole to place a stand.
5