Kohler K-1122-HL Manual De Instrucciones página 2

16"
(40.6 cm)
1-1/4"
(3.2 cm)
11-1/4"
(28.6 cm)
2-1/2"
(6.4 cm)
1-1/2" OD
Product Information
Applicable product:
Bath whirlpool with integral
apron and heater, left drain
Bath whirlpool with integral
apron and heater, right drain
Fixture*:
Bathing well
Basin area bottom 45-1/8" (114.6 cm) x 19-11/16" (50 cm)
Basin area top 52-3/4" (134 cm) x 25-5/16" (64.3 cm)
Weight 140 lbs (63.5 kg)
To overflow
Water depth 15" (38.1 cm)
Capacity 58 gal (219.5 L)
* Approximate measurements for comparison only.
Pump: Hp
1-speed 1.25
Heater: kW
1.5
Required Electrical Service (2 required)
Two dedicated circuits required, each protected with Class A
Ground-Fault Circuit-Interrupter (GFCI):
Pump/control
Heater
1063753-1-B
60" (152.4 cm)
3/4" (1.9 cm)
K-1122-HL shown
K-1122-HR not shown
V Hz A
120 60 7
V Hz A
120 60 12.5
120 V, 15 A, 60 Hz
120 V, 15 A, 60 Hz
No change in measurements if connected
with drain illustrated. (K-7272)
19"
(48.3 cm)
Notes
Install this product according to the installation guide.
Floor support under this product must provide for a minimum of
49 lbs/square foot (240 kg/square meter) loading.
The hot water supply should be 70% of the capacity of the bath or
greater. Installations will vary.
This fixture conforms to ANSI Standard Z124.1.2. All dimensions
are nominal.
2
1-1/4"
(3.2 cm)
1/2" (1.3 cm) R.
Integral Flange
Detail
32" (81.3 cm)
Kohler Co.