Lucent Technologies Icon-Labeled 4400 Serie Manual Del Usuario página 10

CIB 3195 CALA
Issue 1, June 2000
2. Push up on the stand toward the top of the telephone, and place the tab on the thinner end of
the stand into the slot at the top of the 4400-Series telephone.
3. After you have attached the stand to the telephone, plug the line cord into the wall jack and
store the extra line cord in the open pocket space between the telephone and the stand.
4. Place the telephone against the wall so that the screwheads on the mounting plate enter the
holes in the stand. Then pull the telephone down so that the screwheads slide into the cutout
channels.
Page 10 Icon-Labeled 4400-Series Telephones Assembly Instructions