G.SKILL RIPJAWS KM570 MX Guia De Inicio Rapido página 3

Function Combo Keys
The KM570 MX mechanical gaming keyboard supports function combo keys to provide
Windows shortcuts, media control, and lighting customization.
Key Combination
Fn + F1 Open "My Computer"
Fn + F2 Open default Internet browser
Fn + F3 Open default email application
Fn + F4 Open "Calculator"
Fn + F5 Toggle "Windows Key Lock"
Fn + F6 Toggle n-key rollover and 6-key rollover
Fn + F7 Cycles through lighting effects
Fn + F8 Customize per-key lighting
Fn + F9 Previous Track
Fn + F10 Play/Pause
Fn + F11
Fn + F12 Next Track
Fn + → Increase lighting effect speed
Fn + ← Decrease lighting effect speed
Fn + ↑ Increase lighting brightness
Fn + ↓ Decrease lighting brightness
Note: Pressing the "Fn" key on its own will not have any functions.
How to Toggle NKRO
N-key rollover (NKRO) is a function that allows multiple keys to be pressed and registered
simultaneously. Typically, USB keyboards support 6-key rollover by default, so when a 7th
key is pressed, it would not be registered. In some legacy software environment or BIOS
environment, only the default 6-key rollover is supported, so n-key rollover function would
need to be disabled.
On the KM570, n-key rollover is enabled by default. To toggle between NKRO and 6-key
rollover, press "Fn + F6".
3 | ENGLISH
Function Category
Windows Shortcut
Windows Shortcut
Windows Shortcut
Windows Shortcut
Keyboard Control
Keyboard Control
Lighting
Lighting
Media Control
Media Control
Stop Media Control
Media Control
Lighting
Lighting
Lighting
Lighting
On-the-Fly Macro Recording (OTF Macro)
Macro is a sequence of key combination that can be set to activate with a single key press.
The KM570 allows on-the-fly macro recording to any key (except the "MR" and "Fn" key)
without additional software. Macros are typically used to repeat a complex action that uses
two or more keys, which may be useful in games and document processing. To record macro
on-the-fly:
1. Press the "MR" key.
2. Select and press a key to program. (e.g. "F1" key)
3. Press the key combination you wish to program as macro to the key. (e.g. "Ctrl+C")
4. Press the "MR" key to end macro recording. (Now pressing "F1" will function as "Ctrl+C")
Note: To clear the macro from a key, press "MR", then press the key, and press "MR" again to
reset the key to its default function. To stop a macro while it is running, press the "MR" key
once to interrupt and end the macro sequence.
Macro Record (MR) function key is locked by default. To unlock, press "Fn" + "MR".
How to Reset Keyboard Settings
To reset all keyboard settings, press and hold "Left Ctrl" + "Left Alt" + "Right Ctrl" keys for
at least three seconds. The four indicator lights on the top right corner will flash on and off
to indicate that the keyboard settings are being reset to default. The lights will stop flashing
when the reset is complete. The following settings will be reset to its default values:
All per-key macro settings
•
Per-key lighting settings
•
Lighting effect speed
•
Keyboard backlight brightness
•
n-Key/6-key rollover function
•
Windows key lock
•
Limited Product Warranty
The G.SKILL RIPJAWS KM570 MX Mechanical Gaming Keyboard is covered under a 2 year
limited product warranty. For more warranty information, please visit the official G.SKILL
website at http://www.gskill.com/en/warranty.
See Also
For more information, please visit: http://www.gskill.com/en
Technical support email: techsupport@gskill.com
ENGLISH | 4