Makita MP001G Manual De Instrucciones página 7

7. Follow all charging instructions and do not
charge the battery pack or tool outside the
temperature range specified in the instruc-
tions. Charging improperly or at temperatures
outside the specified range may damage the
battery and increase the risk of fire.
Service
1. Have your power tool serviced by a qualified
repair person using only identical replacement
parts. This will ensure that the safety of the power
tool is maintained.
2. Never service damaged battery packs. Service
of battery packs should only be performed by the
manufacturer or authorized service providers.
3. Follow instruction for lubricating and chang-
ing accessories.
Cordless inflator safety warnings
1. When inflating objects, connect the air chuck,
adapter, and valve tightly. Otherwise, the object,
hose, air chuck, or adapter may be damaged and
you may be injured.
2. Release air pressure slowly. When remov-
ing the hose after inflating objects, hold the
object, hose, and air chuck firmly. The object,
air chuck, or adapter may bounce due to exhaust
air and cause an injury.
Do not inflate object beyond the maximum
3.
pressure of the object. Otherwise, the tool or
object may be damaged and you may be injured.
Do not use the tool beyond the maximum out-
4.
put pressure of the tool. Using the tool at output
pressure greater than the maximum output pres-
sure of the tool may burst the object or the tool.
Inflate the objects intended to be inflated by
5.
the manufacturer only, such as tire, sport ball,
or small floating tube. Inflating other objects may
damage them and cause an injury.
6. When inflating objects, check the pressure
gauge, status of the tool and object, and check
that there is no air leak. Otherwise, the tool or
object may be damaged and cause an injury.
7. When carrying the tool, hold the handle of the
tool. Do not hold or pull the hose. The tool may
be damaged and cause an injury.
8. After inflating objects, check the air pressure
using a reliable and calibrated measuring
equipment. Use the pressure gauge of the tool
only as a reference.
9. After using the tool for 10 minutes continu-
ously, stop using the tool for 5 minutes for
cooling down. Do not use the tool beyond the
continuous operating time allowed. Otherwise,
the tool may be damaged and cause an injury.
10. Do not use the tool on sand or dusty surface.
Foreign objects may enter the inside of the tool
and cause a malfunction.
11. Do not point the outlet of the hose to yourself
or others. Objects may be blown away and cause
an injury.
12. Do not point the outlet of the hose to dust or
similar. The dust may be scattered and cause an
injury.
13. Do not inflate large capacity objects. If you
inflate a large capacity object, the tool may
become extremely hot and could burn your skin.
14. Do not touch the tool, hose, air chuck, or
adapter right after inflating objects. The metal
parts may become extremely hot and could burn
your skin.
15. Do not use the tool with wet hands.
16. Make sure that the hose is not entangled. The
entangled hose may cause loss of balance and
cause an injury.
17. Never leave the tool unattended when the hose
is attached to the object or during operation.
18. Do not use the tool as a breathing device.
19. Do not use the tool to spray chemicals. Your
lungs may be damaged by inhaling toxic fumes.
20. Operate the tool in an open area at least 50 cm
away from any wall or object that could restrict
air flow to ventilation openings.
21. Do not disassemble the tool.
22. Use only standard accessories provided
by Makita. The use of any other accessories
or attachments might present a risk of injury to
persons.
23. Before you inflate a tire, make sure that there
are no scratches or cracks in the tire. Damaged
tire can burst when it is inflated and cause an
injury.
24. While you inflate a tire, do not stay in front of
its sidewall.
Important safety instructions for
battery cartridge
1. Before using battery cartridge, read all instruc-
tions and cautionary markings on (1) battery
charger, (2) battery, and (3) product using
battery.
2. Do not disassemble or tamper the battery
cartridge. It may result in a fire, excessive heat,
or explosion.
3. If operating time has become excessively
shorter, stop operating immediately. It may
result in a risk of overheating, possible burns
and even an explosion.
4. If electrolyte gets into your eyes, rinse them
out with clear water and seek medical atten-
tion right away. It may result in loss of your
eyesight.
5. Do not short the battery cartridge:
(1) Do not touch the terminals with any con-
ductive material.
(2) Avoid storing battery cartridge in a con-
tainer with other metal objects such as
nails, coins, etc.
(3) Do not expose battery cartridge to water
or rain.
A battery short can cause a large current
flow, overheating, possible burns and even a
breakdown.
6. Do not store and use the tool and battery car-
tridge in locations where the temperature may
reach or exceed 50 °C (122 °F).
7 ENGLISH