Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Product may vary slightly from what is illustrated.
† 1. Lid cap (Part # BL3000-01)
† 2. Lid (Part # BL3000-02)
3. Handle
† 4. Blending jar (56 oz./7 cups) (Part # BL3000-03)
† 5. Jar base (Part # BL3000-06)
6. Blender base
7. Control panel
† 8. Gasket (Part # BL3000-04) (not shown)
† 9. Blade assembly (Part #BL3000-05) (not shown
Note: † indicates consumer replaceable/removable parts
4
How to Use
This product is for household use only.
GETTING STARTED
• Please go to www.prodprotect.com/applica to register your warranty.
• Wash all removable parts as instructed in CARE AND CLEANING section of this manual.
• Wipe outside of appliance with a damp cloth; dry thoroughly.
BLENDER JAR ASSEMBLY
1. Turn blending jar upside down and place flat on countertop or work surface.
2. Put gasket on top of blade assembly facing up.
3. Place blade assembly with gasket into bottom opening of the jar with blades facing
down.
4. Place jar base onto jar and rotate clockwise until it is tight.
5. Turn assembled jar right side up.
6. Place lid with lid cap onto blending jar.
7. Uncoil power cord from storage area under the base.
8. Place jar assembly on base, making sure it rests comfortably against blender base.
(This jar can be placed in a number of positions on the base.)
9. Blender is now ready for use.
USING YOUR BLENDER
Important: If the blender runs more than 2 minutes, the motor will automatically shut
off. If this happens, press any button to resume operation.
Note: The PULSE function will stop working after 20 seconds of continuous use. The motor
will stop and the blue power light will flash. If this happens, unplug the appliance and
wait 5 seconds for the appliance to reset.
1. Place foods to be blended into jar, liquids first, then any solids.
2. Place lid on jar; make sure lid cap is in place.
3. Plug power cord into outlet.
Note: When in use, do not leave blender unattended. When using hard foods, such as ice,
cheese, nuts and coffee beans, keep one hand on the lid to keep blender in place.
4. To select the speed that best suits your desired task:
a. Press the button with appropriate action for the speed or function you would like
to use (See SPEED CHART on page 7.)
For example: To prepare a smoothie: press SMOOTHIE button.
5. When blending thick mixtures, such as milkshakes, smoothies and frozen drinks press
the appropriate button. There is a preprogrammed cycle that will be integrated – the
blender will automatically pulse several times and then switch to automatically blend
the ingredients to a smooth mixture.
Note: For best results, do not run blender longer than 2 minutes total time.
6. To stop any function at any time press the OFF button.
7. If mixture is not desired consistency, run the cycle a second time.
8. Open the lid cap to add ingredients while the blender is running and drop or pour
ingredients through the opening.
Important: Do not remove the lid while the blender is running.
9. When finished, press the OFF button. Make sure blades have completely stopped
before attempting to remove the blending jar from the base.
10. To remove the jar, grasp the handle and lift straight up.
11. Remove lid to pour.
12. Always unplug the appliance when not in use.
5
Publicidad
Tabla de contenido
