Service And Customer Care - Kenwood AT358 Manual De Instrucciones

Use the blender for soups, drinks,
pâtés, mayonnaise, breadcrumbs,
biscuit crumbs, chopping nuts and
crushing ice.
before using your Kenwood
attachment
Read these instructions carefully and
G
retain for future reference.
Remove all packaging and any
G
labels.
before using for the first time
Wash the parts: see 'cleaning'.
key
filler cap
lid
goblet
blade unit with sealing ring
base
vents
to use your blender
1 Fit the blade unit inside the base
2 Screw the goblet onto the base.
3 Put your ingredients into the goblet.
4 Fit the lid by pushing down until
secure. (Ensure one of the
protrusions on the lid fits over the
spout on the goblet.)
5 Place the filler cap into the lid and
push down to secure.
6 Remove the high speed outlet
cover .
7 Place the blender over the outlet,
turn clockwise and at the same time
push down until the unit engages
Then turn further clockwise until the
attachment locks into position.
8 Switch to the required speed.
9 Once the desired consistency has
been achieved, switch off and
remove the blender supporting it
with both hands.
hints
We recommend that hot liquids are
G
allowed to cool before blending.
However should you wish to process
hot liquids please read the Hot
Blending Instructions.
To prevent leaks make sure the
G
goblet is locked firmly into the base.
When making mayonnaise, put all
G
the ingredients, except the oil, into
the blender. Then, with the machine
running, remove the filler cap and
add the oil slowly and evenly.
Thick mixtures, e.g. pâté, dips: use
G
low to medium speed, scraping
down when necessary. If it's difficult
to process, add more liquid.
Alternatively use the pulse setting to
get the ingredients moving over the
blades.
When crushing ice, process small
G
amounts at a time and use the Pulse
setting. It is advisable to hold your
hand on the lid and filler cap during
the operation.
cleaning
Always switch off, unplug and
G
dismantle before cleaning.
Empty the goblet before unscrewing
G
the base.
.
blade unit
Always take care when
handling the blade unit and
avoid touching the cutting
edge of the blades.
1 Brush the blades clean under the tap.
Keep the underneath of the unit dry.
2 Leave to dry.
other parts
Wash by hand in hot, soapy water
then dry. Alternatively the goblet, filler
cap, lid and base can be washed in
your dishwasher.
.
Any other servicing should be
G
performed by an authorized service
representative.
service and customer
care
If the cord is damaged it must, for
G
safety reasons, be replaced by
KENWOOD or an authorized
KENWOOD repairer.
If you need help with:
using your appliance
G
servicing or repairs
G
Contact the shop where you bought
your appliance.
5