Connecting To Wi-Fi; Powering Your Roadmate; Inserting An Sd Card - Magellan RoadMate 66 Serie Manual Del Usuario

Setting Up Your RoadMate.

Connecting To Wi-Fi.

For the best experience while getting started. make sure you have a good Wi-Fi signal:
1. Tap from the Map screen > tap Network.
2. Scan for nearby Wi-Fi networks until you locate a network.
3. Tap on a Wi-Fi network.
4. Enter the Wi-Fi network password (if applicable) > tap Connect.

Powering Your RoadMate.

1. Connect your RoadMate to AC Vehicle Power Adapter (VPA) or wall adapter.
2. Press and hold the Power button for a few seconds to turn on your RoadMate.
3. Press the Power button again and wait 10 seconds to put your RoadMate in Sleep
mode at any time. You'll return to the same screen when you power the device on.
4. Press and hold the Power button for a few seconds to turn your RoadMate off.

Inserting An SD Card.

Insert a microSD card (up to 64GB) into the slot at the top of the device in order to take
photos and record videos. Until you insert an SD card, your device will not be able to
save any photos or videos.
Note: Do not insert an SD card into the slot on the left side of the device.
6