Installing And Connecting; Settings - Dippo DPSIN Manual

English

Installing and Connecting

Electric and environmental requirements for installing DPSIN:
1) DPSIN must be installed in a dry site free from dust and where the temperature
varies between 10 and 40 degrees Celsius.
2) The electrical grid must be stable and should not be shared with high
consumption equipment, such as operating machines, copiers, fax machines and
others tha may generate noise in the network.
Physical Installation
1) In order to place the product in its place of use, make two holes in the wall, place
the bushings and screws that accompany the product and hang it on the wall.
2) In order to connect it to the electrical grid, use an electric socket. The equipment
is automatic bivolt (90~240VAC).
3) In order to turn the sirens on, connect them in the side outputs of the equipment.
4) Do not leave anything lying on the electric energy cables.
5) Do not leave the cables exposed in the sites where there is a flow of people.

Settings

Equipment Options
Set equipment date and time.
Test Option
This is a function that must be used only by technicians performing functionality
tests in the product. Dippo suggests that this menu not be accessed.
15