Publicidad
Idiomas disponibles
Idiomas disponibles
Instructions of operation.
- Make sure that the power switch is off before plugging.
- Remove the water tank, remove the lower tank nut, fill with water and then return
to put the nut. Pay attention that you can only fill cold water, never hot.
- Remember to always use distilled water free of chemicals and odors.
- Replace the water tank and make sure it is placed correctly.
- Plug into the socket.
- Press the pedal switch to turn on the appliance and the indicator light will come on.
- The steam will start to come out through the head in about 45 seconds after turning on.
- To end its use, press the ignition pedal again to turn off the appliance.
- Disconnect the plug from the socket.
Installation of the clothes rack
1:Firstly, put hook A on the supporting pole B.Then attach the hanger D to the hook,
making the hanger D fastening down vertically.
2:Opening the two sides of hanger (see picture d), take out the small aluminum pole from
the packing-case, firstly insert one end of the pole into the hole on the hanger. Then insert
the two trousers clips through the pole from the other end. Meanwhile the other end of
the pole should aim and insert to the other hole on the hanger. At last, move the two
clips to appropriate positions.
P a
Method of Steaming:
- The effect of steam at high temperature is to soften the fiber of clothing.
- Gently pull the surface of the clothes and pass the steam head to iron it.
P b
P c
P d
P e
Publicidad
