Stopping The Generator - Firman P03502 Manual Del Operador

5. Stopping the generator

1. Turn off and remove all electrical loads.
Never stop the generator with electrical devices plugged in and turned on.
Never stop the engine by moving the choke to the start position.
Let the generator run at no-load for one minute to stabilize internal temperatures of the engine
and generator.
2. Flip the engine switch to"OFF"(O) position.
Do not leave the generator until it has completely stopped.
3. Turn the fuel valve to the "OFF"(O) position.
If a cover is used, do not install until unit has cooled.
English
2S
18
OPERATION
Customer Service: 1-844-FIRMAN1