Denver MCI-102 Instrucciones De Uso página 55

REPEAT PLAYBACK FUNCTION
- AT ANYTIME DURING PLAYBACK:
- PRESS P-MODE KEY (SAME AS PLAY MODE KEY ON REMOTE CONTROL)
REPEATEDLY TO SELECT:
PRESS ONCE = REPEAT ONE: TO REPEAT THE CURRENT TRACK
(DISPLAY FLASHES "REP")
PRESS TWICE = REPEAT ALL: TO REPEAT ALL TRACK
(DISPLAY SHOWSS "REP")
PRESS THREE = RANDOM:
TO SHUFFLE ALL SONGS ON A DISC.
(DISPLAY SHOWS "RAND")
MUTE FUNCTION
- THIS SET HAS A MUTE FUNCTION TO ENABLE YOU TO TURN OFF THE VOLUME
TEMPORARILY.
- PRESS THE MUTE KEY (ON REMOTE CONTROL) ONCE, THE VOLUME WILL TURN
OFF AND THE MUTE SYMBOL WILL SHOW ON THE DISPLAY.
- TO RESUME THE SOUND, SIMPLY PRESS THE MUTE KEY AGAIN.
USING THE AUDIO LINE IN CONNECTION (AUX-INPUT)
- YOU CAN CONNECT THE AUDIO OUTPUT OF AN EXTERNAL DEVICE SUCH AS A MP3
PLAYER OR A TV TO THIS UNIT, TO LISTEN TO THE SOUND OF THAT DEVICE
THROUGH THE HIGH QUALITY AMPLIFIER OF THIS MUSIC SYSTEM.
- TO CONNECT THE EXTERNAL DEVICE PLEASE USE A STANDARD STEREO
HEADPHONE (3.5MM TO 3.5MM PLUGS) CABLE TO CONNECT THE
"HEADPHONE-OUT OR AUDIO LINE-OUT" OF THE DEVICE TO THE AUX-INPUT SOCKET
OF THIS UNIT.
- SWITCH THE FUNCTION TO "AUX" USING THE
KEY ON REMOTE CONTROL.
- SWITCH ON THE UNIT AND THE EXTERNAL DEVICE (eg. MP3-PLAYER OR TV).
- START PLAYBACK OF THE EXTERNAL DEVICE AND ADJUST THE VOLUME CONTROL
OF THE MAIN UNIT TO THE DESIRED LEVEL.
- REMEMBER TO SWITCH OFF THE UNIT WHEN YOU ARE FINISHED USING THE
EXTERNAL DEVICE.
SPECIFICATIONS
POWER SUPPLY : ......................................... AC 230V ~ 50 Hz
POWER CONSUMPTION : ............................. 23W
SPEAKER : ..................................................... MAIN SPEAKER: 2.5" x 2
FREQUENCY : ............................................... FM 87.5 - 108 MHz
FUNCTION KEY ON UNIT OR "AUX"
MYLAR SPEAKER: 1¼" x 2
E-11
THE APPARATUS SHOULD NOT BE EXPOSED TO DRIPPING OR SPLASHING AND
NO OBJECTS FILLED WITH LIQUIDS SHOULD BE PLACED ON THE APPARATUS.
THE MARKING AND RATING LABEL IS LOCATED AT REAR ENCLOSURE OF
THE APPARATUS.
THE MAINS PLUG IS USED AS THE DISCONNECT DEVICE AND IT SHALL REMAIN
READILY OPERABLE. TO BE COMPLETELY DISCONNECTED THE POWER INPUT,
THE MAINS PLUG OF THE APPARATUS SHALL BE DISCONNECTED FROM
THE MAINS COMPLETELY. THE MAINS PLUG SHOULD NOT BE OBSTRUCTED OR
SHOULD BE EASILY ACCESSED DURING INTENDED USE.
UNDER THE INFLUENCE OF ELECTROSTATIC PHENOMENON,
THE PRODUCT MAY MALFUNCTION AND USER TO POWER RESET.
BATTERY SHALL NOT BE EXPOSED TO EXCESSIVE HEAT SUCH AS SUNSHINE,
FIRE OR THE LIKE.
CAUTION
DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY REPLACED. REPLACE ONLY
WITH THE SAME OR EQUIVALENT TYPE.
WALL MOUNT SET UP
- THIS UNIT CAN BE MOUNTED ON TO A WALL SURFACE.
- TYPE OF SCREWS USED FOR WALL-MOUNTING: 3.5 X 34MM BA (2 PCS)
IMPORTANT PRECAUTIONS
Not all types of walls are suitable or strong enough to support the weight of
this unit.
Please refer to a specialist to make sure that your wall is suitable, before wall
mounting. Drilling of holes must also be done by an experienced specialist,
to avoid injury and damage to your walls. Never place objects on top of the
speakers when they are wall mounted.
E-12