Trimmer Adjustment - GBD SC230 Instrucciones Para La Instalación

SC230
10 - DIP SWITCH SW4
The settings are stored during the rest phase (gate closed).
The DEFAULT settings are coloured in grey
DIP Function
ATTEMPTS AFTER
DIP 1 SAFETY DEVICES
INTERVENTION
DIP 2 ELECTRONIC BRAKE

11 - TRIMMER ADJUSTMENT

Trimmer Default
Adjusts the PAUSE TIME from 2 to 220 seconds. The value is increased by turning the trimmer
PAUSE
clockwise.
Adjusts the motor FORCE/SPEED during the not decelerated movement period.
FORCE
Adjusts the motor FORCE/SPEED level during the decelerated movement period.
SLOW
Adjusts the intervention sensitivity of the motor rpm sensor .
SENS
Turning the trimmer clockwise, the sensitivity decreases.
Status
Disables the function.
ON
Enables the function attempts after the intervention of the safety devices.
After the intervention of the safety device SAFETY or SAFETY-STOP (DIP 10 = ON) or
of the MOTOR RPM SENSOR and, after 10 seconds, the automation will try, for 3
times max., to restart the motion in the direction that has been interrupted.
After another intervention of the safety device, the automation stops waiting for some
commands.
OFF
A programming of the function different from the configuration pre-set by the
manufacturer, although it allows, if correctly done, the reduction of the cases of stop of
the system in intermediate position (as a simply example, for the presence of frictions,
wind and/or obstacles on the way of the movable element), causes, in any case, a
reduction of the safety level of the same system and a consequent danger for people
safety.
Electronic brake enabled.
Activate this function when the gate shows excessive inertia or its movement exceeds
ON
the limit switches.
Electronic brake disabled.
OFF
WARNING: If the trimmer adjustment is less than 20% and according to the characteristics of
the system, it is possible that the gate stops before finishing its stroke.
Adjust appropriately the trimmer avoiding too low adjustments.
WARNING: If the trimmer adjustment is less than 20% and according to the characteristics of
the system, it is possible that the gate stops before finishing its stroke.
Adjust appropiately the trimmer avoiding too low adjustments.
Description
WARNING!
Description
15
UK