Steren CCTV-908 Manual De Instrucciones página 7

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

9.- CAM1, 2, 3 y 4
Allows you to view CAM 1 and 5, CAM 2 and 6, CAM 3 and 7, CAM 4
and 8
10.- PB
Access to the record / playback VCR
CONNECTIONS
1. Locate the BNC inputs on the rear panel of the recorder
2. Connect camera 1 to the input jack labeled as "CAM1". Do the same
for cameras 2, 3, 4, 6, 7 and 8.
3. Connect a monitor in the jack labeled as "MONITOR OUTPUT" with
a BNC connector
4. If you wish to use a VCR for playback , connect it to the VCR input
jack.
5. If you wish to use a VCR for recording , connect it to the VCR output
jack.
6. Connect the power jack to the power input and the other end to the
electrical power source.
To use the ports of alarm and RS-232C go to the section
"RS-232 and Alarm interface"
ENGLISH-07

Publicidad

Tabla de contenido
loading

Tabla de contenido