Video Auxiliary Output - Steren CCTV-965 Manual De Instrucciones

Press the numeric keys to switch between each cameral preview. For example, you can press [2] key to preview camera 2.
Remember that the DVR must be on SHIFT status (STATUS light on and green).
Press [EDIT] key to switch to manual cycle preview. The cameras will show in order from 1 to 4, switching when you press
[EDIT] or in the preset time interval.
Press [PREV] key to switch to multi-screens preview.
Make sure that the numeric button is in "function" mode (the STATUS lamp is off). Press the [SHIFT] button to switch
between "numeric" mode and "function" mode.
1.- Connect Video out 2 with monitor by a cable.
2.- Press [3] to enter the auxiliary video mode.
3.- Press [SHIFT] to enter the numeric mode
4.- Press [1] to [4] button to switch the video spot output from channel 1 to channel 4
Note: Make sure that there is video signal input; otherwise auxiliary video will be only shown as a blue screen.
10
Camera record Status
Camera alarm status

Video auxiliary output

1
2
VIDEO OUT