Playback With Mouse Connected; Control Bar Descriptions - Steren CCTV-965 Manual De Instrucciones

Pause/Continue: Press [ENTER] to pause/continue playback. Use [ENTER] to show the next video frame.
Copy segment: [EDIT]; Stop copy: [EDIT] (Need a back up device to store the segment)
Exit: [ESC]
Exit playback
In playback interface, press the [ESC] key to enter the preview mode.
In playback interface, press the [MENU] key to enter main menu, press the [REC] key to enter the manual record, and press
the [PTZ] key to enter the PTZ control mode.
If you playback with a mouse connected, the interface will be a little different. And You will see more functions to operate in
the playback course which is shown as Fig.4.11 below.
There is an additional bar that appears. We call it the control bar.
Backup Recorded Files
Note: The user must have the "Playback" right. Please connect the backup devices before you start to backup.
In playback interface, you can backup recorded files.
In preview mode, press the [PLAY] key, select the username and input the correct password, and enter the playback
interface.
In the menu mode, just press the [PLAY] key, you can enter the playback interface directly.
Backup recorded files within the day
In playback interface, move the "Active Frame" to the "Backup Today" button, press [ENTER] key. All recorded files, within
the day, on all channels will be backed up to the storage device. A pop-up dialog will display the backup status.
If the backup device is not correctly connected or the DVR does not detect the backup device, an exception dialog will pop
up. Please ask administrator for more information.

Playback with mouse connected

Control bar descriptions

You can click these buttons to skip backward or forward 3% each time.
You can click these buttons to select the play speed.
Click this button to pause.
Click this button to mute, click it again to recover the sound.
Click this button to start copy the segment, click it again to stop.
Click this button to hide the control bar, right click your mouse and select display, then the
control bar will turn up again.
Click this button to trigger a rectangle area on the screen ,draw the rectangle with left key
of your mouse pressed and move to the area you want to zoom in then double click left
key to zoom in that place. Click left key again to return to the playback interface.
Click these buttons to switch to next or previous playback channels. It is useless if you
only have one channel recorded at that time.
15