Descargar Imprimir esta página

Tork 551102 Guia De Inicio Rapido página 2

Adaptador de alimentacion ca para dispensador matic intuition

Publicidad

Idiomas disponibles

Idiomas disponibles

AC Power Adaptor for Tork Matic
Warnings:
• This appliance can be used by children aged from 8 years and above and persons with
reduced physical, sensory or mental capabilities or lack of experience and
knowledge if they have been given supervision or instruction concerning use of the
appliance in a safe way and understand the hazards involved
• Children shall not play with the appliance
• Cleaning and user maintenance shall not be made by children without supervision
The access to the service area should only be permitted to persons having knowledge and
practical experience of the appliance, in particular as far as safety and hygiene are
concerned. This appliance must only be supplied at SELV.
Use:
This dispenser is not suitable for installation outdoors or in wet environments. It is not
water-resistant. Under no circumstances should the dispenser be hosed-down or
contacted by a water jet. To ensure proper function, the dispenser must be installed in
an environment with minimum and maximum ambient temperatures between 41 and 86°F
(5 - 30°C). The dispenser should acclimate at these temperatures for 24 hours prior to
installation. Operating sound level of the dispenser is less than 70 dBa.
Battery and Optional Power Adaptor:
Dispenser shall be powered with three (3) D type alkaline batteries. Do not use
re-chargeable batteries. For optimal performance, batteries should be stored at
temperatures between 41 and 86°F (5 – 30°C). Do not mix batteries from different
manufacturers. Do not mix batteries with different date codes. Do not mix new and
used batteries. Three (3) batteries are to be inserted in the door of the clear battery
compartment with positive terminal facing up. When batteries have been exhausted,
they must be removed from the dispenser and safely disposed. If the dispenser is
unused or unopened for a long period of time, the batteries should be removed.
The supply terminals are not to be short-circuited. For battery installation, see
Figure 5 in the instruction manual.
An optional manufacturer-supplied plug-in power supply is available. Order SCA part
number 551102. This accessory must be installed according to instructions provided
with the article assembly. Failure to use the manufacturer's power supply, or to follow
instructions, presents a risk of electrical shock, may result in destruction of the dispenser
and/or its software, and presents significant risk of injury or property damage.
Important - batteries must be removed prior to connecting manufacturer's power supply to
an electrical outlet.
Cleaning and Maintenance:
Exterior of dispenser should be dusted daily with a soft, lint-free cloth. Do not use abrasive
materials or paper towels as they may scratch the surface. Wipe surface as needed with a
clean, damp cloth, or a solution of mild soap and water.
The inside of the dispenser should be cleaned at least once per month, or when paper
dust is visible. Remove the paper roll. Clean dust inside the dispenser with a vacuum or
compressed air. Always wear eye protection when using compressed air. After removing
paper dust, wipe the inside of hood, roll arms, and other interior surfaces with a dry
microfiber or slightly damp cloth. Do not spray liquid or cleaners into the dispenser.
Damaged or malfunctioning product should be disposed of immediately to avoid potential
injury.
1
Dispenser with Intuition
Model: 551102
Hand Towel Roll
®
Sensor
TM

Publicidad

loading