Allen + Roth GCBN80022 Manual Del Usuario página 5

Add the necessary 3 in. rods (E), 6 in. rods (F)
4.
and 12 in. rods (G) to assembly to achieve desired
fixture length. Before connecting any of the rods
together, be sure to feed LED wires (D) through
each added section.
Note: The length of the rod assemblies must be
the same on each side, and you must leave at
least 6 in. of LED wire (D) on each side to ensure
proper installation to the outlet box.
5.
Feed LED wires (D) up through the previously
assembled threaded tube assemblies (B) and
canopy (A).
6.
Place the canopy (A) and threaded tube assemblies
(B) on to the top of rod assemblies. Use pliers (not
included) to rotate preassembled hex nuts clockwise,
tightening the threaded tube assemblies (B) to the
rod assemblies.
4
G
F
E
H
5
6
Hex nut
A
Lowes.com/allenandroth
5
D
B
D
B
A
A
F
®