Allen + Roth GCBN80022 Manual Del Usuario página 6

7.
Rotate the preassembled wing nuts clockwise
and tighten the threaded tube assemblies (B)
to the canopy (A).
Starting with the LED wires (D) coming from
8.
both rod assemblies, attach the LED wires (D)
to the LED driver wires -- black to black, white to
white. Secure with previously removed orange
wire connectors, then wrap connections with electrical
tape (not included).
Note: Any excess LED wire (D) should be cut or
re-wrapped with previously removed fasteners
before being placed back inside the canopy (A).
9. Connect the fixture wires to the supply wires --
black to black (Hot), white to white (Common). Then,
wrap the ground wire from the fixture around the
ground screw on the mounting bracket assembly (CC)
and connect the ground/copper of fixture wire to the
ground wire of outlet box supply wire. Secure
connections with wire nuts (BB), then wrap connections
with electrical tape. Push all excess wire and wire
connections back into the outlet box.
CAUTION: Two people are recommended for this step.
Hardware Used
Wire nut
BB
7
A
8
D
A
9
CC
BB
x 3
6
Wing nut
Fixture wire
LED Driver
Orange wire
LED Driver
connector
Fixture wire
Outlet box
A
Lowes.com/allenandroth
B
LED Driver
wire
D
®