Auger Grabbing Stomper Instructions - Weston Butcher MG08 Serie Manual Del Usuario

AUGER GRABBING STOMPER INSTRUCTIONS

WARNING Electrical Shock Hazard. Disconnect power before cleaning,
w
disassembling, or assembling. Do not immerse cord, plug, or motor in water
or other liquid.
To use the Stomper to disassemble the
head of the Meat Grinder, follow these
instructions:
1. Unscrew the Front Ring Nut.
2. Make sure Meat Grinder is unplugged.
3. Attach the handle end of the Stomper
onto the Auger Pin. The opening on
the Stomper should completely secure
around the groove in the Pin (FIGURE
12).
4. Pull the Stomper toward yourself, and
away from the Grinder. The Auger will
begin to disengage from the head of
the Grinder.
5. Use the hand that is not holding the
Stomper to guide the Auger out from
the head completely.
6. The Auger, Grinder Knife, and Plate are
all now free from the head and can be
cleaned appropriately (FIGURE 13).
840303701 v15.indd 13
Stomper
Auger Pin
Front Ring Nut
Auger
Knife
Plate
FIGURE 12
FIGURE 13
Head
13
2/21/20 10:26 AM