Locking Modes, Scales And Units; Turning The Clicker & Beep On/Off; Using The Custom Scale/Ruler; Memory Function Keystrokes - Calculated Industries SCALE MASTER CLASSIC Guia Del Usuario

1.800.561.8187

Locking Modes, Scales and Units

Your Scale Master Classic comes equipped
with a lock switch that prevents inadvertently
changing drawing scales. When the lock is
activated, a lock symbol will be displayed in the
LCD. While active, the Mode, Scale and Units
cannot be revised.
Turning the Clicker & Beep On/Off
To toggle the rolling click off or on, press
[RESET] + [SCALE] . This will also toggle the
" " and error/notification beep off or on.
count

Using the Custom Scale/Ruler

The default value (after a Clear All/Software
Reset) for Custom Scale is one-to-one (e.g.,
1 inch equals 1 inch). This lets you use your
Scale Master Classic as a rolling ruler, which is
especially useful for measuring irregular shapes.
1) To reset your Custom Scale setting to a one-
to-one ratio, press [RESET] + [SUBTRACT/
COUnT] to perform a Clear All.
2) Then press the key until the
[MODE]
" " mode appears.
custom
3) Begin rolling.

Memory Function Keystrokes

[RCL] [M1+]
Displays the value stored in the
M1+
[RCL] [M2x]
Displays the value stored in the
M2x
www. .com
memory register.
memory register.
(Cont'd)
7 – User's Guide
information@itm.com