Wolder miTab Legend Manual De Usuario página 41

2.1 2.1 Battery Battery management management
2.1 2.1 Battery Battery management management and
Before using for the first time, please make sure the battery is fully
charged.
Connect the adaptor or USB interface to charge the battery.
Charge for 6 hours the first two times. After that you only need 4
hours to fully charge the device.
【Note】: This tablet uses a built-in polymer battery. The charger must be a standard
adaptor (Input: AC110~240V 50/60Hz Max：180 MA. Output: DC5.0~5.5V/1.5A). This
device does not allow DC charging. Use the USB interface to charge.
The battery icon will scroll during charging.
When fully charged the battery icon stop scrolling.
In order to prolong the service life of the device, fully discharge the
battery before recharging.
【Note】:
1. If the tablet will not be in use for some time, charge/use the battery once a
month to avoid power consumption damage.
2. After low battery shutdown connect the DC adaptor. A message will appear
indicating that the battery is low. Wait until the battery has enough power to access the
main menu.
3. The device should be in standby mode to achieve normal charging times.
The screen power consumption may cause longer charging times.
2. 2. 2. 2. Initial Initial Initial
Initial use
and and charging charging
and charging charging
4
use use
use