Structure And Function - GEHA Office X12 Manual De Instrucciones

- In case the device displays any unusual characteristics (e.g. strange smell or smoke),
immediately stop operating the device and remove the mains power plug from the wall
socket.
sETTING Up ThE fILE shrEDDEr
1. The centre of gravity is located in the top part of the device. Make sure to position the file
shredder on an even surface to prevent it from toppling over.
2. Never operate the device near sources of heat or cold, or in an overheated, moist or
dusty environment.
3. Place the device close to a wall socket and ensure easy access to the wall socket, in
case the device needs to be deactivated.
4. Make sure that the waste paper container is pushed all the way into the device.
5. Connect the mains power plug to a regular 220-240 V AC wall socket.

sTrUcTUrE aND fUNcTIoN

1 Display (Status)
2 Display (Power)
3 Display (Economy)
4 Button for reversed operation (REV)
5 Button for forward operation (FWD)
6 Viewing window
7 Waste paper container
8 Rollers
commIssIoNING ThE fILE shrEDDEr
The device can shred a maximum of 12 sheets (A4, 70 g/m²) simultaneously. Switch on
the file shredder by pressing the power button on the rear of the device. Two green LEDs,
'Power' and 'Status', light up.
The shredder automatically detects paper in the feeder and the device activates. If you have
fed only a small amount of paper into the device (approx. 1-5 sheets A4, 70 g/m²), the shred-
der will operate in 'Economy' mode. The operating mode is displayed by the lit up green LED
'Economy'. Once all paper has been shredded and no additional paper is fed into the machine,
the device stops automatically (Standby Mode). The green LED 'Economy' is no longer lit.
If you have fed 6 - 12 sheets of paper (A4, 70 g/m²) into the device, the machine will con-
sume more power and the LED 'Economy' will not light up.
An automatic reverse and stop function prevents a paper jam when the device is overloaded
10
Manual_Office_X12.indd 10 15.07.10 15:40