Scart/Cvbs/S-Video/Hdmi/Dvd Modes Settings; Vga Mode Settings; Dtv Mode Settings (Tnt) - LEXIBOOK LCDDVD2TFFR Manual De Instrucciones

Reset
Select this option with the ▲and▼ buttons and press ENTER to reset the default settings.

SCART/CVBS/S-VIDEO/HDMI/DVD MODES SETTINGS

1. Press the INPUT button on the remote control, then use the▲ and ▼buttons to set the video source to
"TV", "SCART", "CVBS (AV)", "S-VIDEO", "VGA" (PC), "HDMI" or "DVD", and press ENTER to confirm.
2. Press the LCD-MENU button, then use the and buttons to select the desired menu.
IMAGE Menu (same as "IMAGE" menu in TV mode).
AUDIO Menu (same as "AUDIO" menu in TV mode).
PARAMETERS Menu (not available).
TIMER Menu (same as "TIMER" menu in TV mode).
FUNCTION Menu (same as "FUNCTION" menu in TV mode).
Press the INPUT button on the remote control, then use the▲ and ▼buttons to set the video source to
«VGA», and press ENTER to confirm.
IMAGE Menu
Same as the "IMAGE" menu in TV mode, but you cannot change the "Color" option. The "Color
temperature" option is available and can be set to "Norma", "Warm" and "Cold".
AUDIO Menu (same as "AUDIO" menu in TV mode).
PC Position
Auto Sync
1. Press the LCD-MENU button, then use the ◄ and ► buttons to select the "PC-position" menu.
2. Use the ▲ and ▼buttons to select the "Auto Sync" option then press ENTER to start the automatic
parameter configuration.
Phase
Use the ▲ and ▼buttons to select the "Phase" option then use the ◄ and ► buttons to set the phase and
stabilize the image.
Clock
Use the ▲ and ▼buttons to select the "Clock" option then use the ◄ and ►buttons to optimize the image
size.
H position
Use the ▲ and ▼buttons to select the "H position" option then use the◄ and ► buttons to set the
horizontal position of the image.
V position
Use the ▲ and ▼buttons to select the "V position" option then use the ◄ and ► buttons to set the
vertical position of the image.
Reset
Select this option with the ▲and▼ buttons and press ENTER to reset the default settings.
TIMER Menu (same as "TIMER" menu in TV mode).
Press the INPUT button on the remote control, then use the▲ and ▼buttons to set the video source to
«DTV», and press ENTER to confirm.
IMAGE Menu (same as "IMAGE" menu in TV mode).
AUDIO Menu (same as "AUDIO" menu in TV mode).
PARAMÈTERS Menu
34 Country (same as in TV mode).

VGA MODE SETTINGS

DTV MODE SETTINGS