Selective Recognition Of Luminaires; Changing Number Of A Luminaire Already Installed - Zemper PZD-250 Manual Del Usuario

Selective recognition of a luminaire.
To recognise a luminaire, follow these steps:
Connect the programmer to the zone (with installed luminaires) where the luminaire we want to operate on is

installed:
From the screen "LUMINARY MENU" "OPERATION IN LUMINARY" (see "Operations on luminaires") with

the scroll buttons select "MONITORING TEST".
The following screen appears:

Enter the number of the luminaire you want to recognise (three digits), from 001 to 125.

Press "OK" to confirm the number entered. At this moment, the programmer starts recognising the selected

luminaire.
If the luminaire is not recognised the LED ERR will be ON, and the message "NOT RECOGNISED" appears

on the screen.
If the luminaire is recognised, the message "CORRECT" appears on the screen.

Press "OK." to return to the main screen "OPERATION IN LUMINARY".

The recognition operation can be run on both lights that are connected to mains supply and those that are not.
Change of number of a luminaire already installed.
To change the number of a luminaire already installed, follow these steps:
Connect the programmer to the zone (with installed luminaires) where the luminaire we want to operate on is

installed:
From the screen "LUMINARY MENU" "OPERATION IN LUMINARY" (see "Operations on luminaires") with

the scroll buttons select "NUMERATION".
The following screen appears:

Enter the number of the luminaire you want to number again (three digits), from 001 to 125.

Press "OK" to confirm the number entered. The following screen appears:

Enter the new number of the luminaire you want to number again (three digits), from 001 to 125.

Press "OK" to confirm the number entered. At this moment, the programmer starts reprogramming the

selected luminaire. This operation may last between 5 to 15 seconds.
If the luminaire is not correctly numbered the LED ERR will be ON, and the message "ERROR" appears on

the screen.
If the luminaire is correctly numbered, the message "NUMERATION OK" appears on the screen.

Press "OK." to return to the main screen "OPERATION IN LUMINARY".

LUMINARY MENU
TEST OF
LUMINARY
---
LUMINARY MENU
ACTUAL number OF
LUMINARY
---
LUMINARY MENU
NEW number OF
LUMINARY
xxx ---
39