Aprobación Culus - Siemens SIMATIC ET 200SP Manual Del Usuario

Aprobación cULus
Underwriters Laboratories Inc. según
• UL 508 (Industrial Control Equipment) O BIEN UL 61010-1 y UL 61010-2-201
• CAN/CSA C22.2 No. 142 (Process Control Equipment) O BIEN CAN/CSA C22.2 No. 61010-1
y CAN/CSA C22.2 No. 61010-2-201
O BIEN
Aprobación cULus HAZ. LOC.
Underwriters Laboratories Inc. según
• UL 508 (Industrial Control Equipment) O BIEN UL 61010-1 y UL 61010-2-201
• CAN/CSA C22.2 No. 142 (Process Control Equipment) O BIEN CAN/CSA C22.2 No. 61010-1
y CAN/CSA C22.2 No. 61010-2-201
• ANSI/ISA 12.12.01
• CAN/CSA C22.2 No. 213 (Hazardous Location)
APPROVED for use in
Class I, Division 2, Group A, B, C, D T4;
Class I, Zone 2, Group IIC T4
Installation Instructions for cULus haz.loc.
• WARNING - Explosion Hazard - Do not disconnect while circuit is live unless area is known
to be non-hazardous.
• WARNING - Explosion Hazard - Substitution of components may impair suitability for Class
I, Division 2 or Zone 2.
• This equipment is suitable for use in Class I, Division 2, Groups A, B, C, D; Class I, Zone 2,
Group IIC; or non-hazardous locations.
WARNING: EXPOSURE TO SOME CHEMICALS MAY DEGRADE THE SEALING PROPERTIES OF
MATERIALS USED IN THE RELAYS.
O BIEN
CSA
CSA C22.2 (Industrial Control Equipment Motor Controllers)
O BIEN
Sistema de periferia descentralizada
Manual de sistema, 05/2021, A5E03576852-AK
14.1 Normas, homologaciones y consignas de seguridad
Datos técnicos
285