Antop AT-601W Manual De Instrucciones Para Su Instalación página 3

2) USB AC/DC Power Adapter& USB Cable
• Input: 100-240V~50-60Hz, 150mA
• Output: DC 5V 200mA
• USB Cable Length: 5ft
Following are instructions for installation. Read through all instructions prior to beginning
installation procedure.
Instructions
1. Connecting
Connect the shorter end(0.3ft in length)of the coaxial cable to a non-amplified/passive antenna.
Connect the longer end (3ft in length) of the coaxial cable to the ANTENNA/CABLE IN connector
on the back of the TV or converter box.Connect the DC female plug of the USB cable to the DC
socket in the Smartpass Amplifier, and connect the USB plug to the USB AC/DC power adapter.
Connect the power adapter to a wall socket.
USB Cable and
USB AC/DC Power Adapter
Dual-color LED Smart Switch
Indicator
Connect to ANTENNA/CABLE IN connector
on the back of TV or Converter Box
Connect to Non-amplified/passive
Antenna or antenna cable from
TV Wall Plate
2